Recent Posts

6/recent/ticker-posts

“150”, Aptitude Test Questions and Answers for Artisan Grade II (Automobile) – TANESCO.



“150”, Aptitude Test Questions and Answers for Artisan Grade II (Automobile) – TANESCO.

ABSTRACT

This aptitude test preparation package contains 150 multiple-choice questions and answers designed to prepare candidates for the position of Artisan Grade II – Automobile at the Tanzania Electric Supply Company Limited (TANESCO). The questions assess candidates’ knowledge and practical understanding of automobile mechanics, engine systems, transmission, braking, steering, suspension, electrical and electronic systems, vehicle diagnostics, preventive maintenance, workshop safety and technical calculations. They are structured to reflect the technical demands of the position, with challenging and closely related answer options intended to test critical thinking, accuracy and problem-solving abilities. Each question is accompanied by a correct answer and a detailed explanation to strengthen understanding and improve candidates' confidence and readiness for the aptitude test.

 

Prepared for: Candidates applying for Artisan Grade II (Automobile) – TANESCO

Independent aptitude-test preparation resource; not an official TANESCO publication.

0628729934.

Date: November 13, 2026

 

Dear applicants,

This collection of 150 multiple-choice questions and answers is designed to help candidates revise electrical trade knowledge relevant to aptitude tests and recruitment assessments for Artisan Grade II (Automobile) – TANESCO. It is an independent preparation resource, not an official TANESCO examination paper, and it does not guarantee that any question will appear in a recruitment assessment. I wish you success in your preparation and recruitment process!

 

Warm regards,

Artisan Grade II (Automobile) – TANESCO Aptitude Test Preparation Guide

 

Independent aptitude-test preparation guide for candidates applying for Artisan Grade II (Automobile) – TANESCO. Not an official TANESCO publication.

Artisan Grade II (Automobile) – TANESCO.

150 Aptitude Test Questions and Answers


1. A diesel-powered utility vehicle experiences difficulty starting when the engine is cold, produces excessive white smoke immediately after starting and runs unevenly for several seconds. The battery, starter motor and glow-plug system have been confirmed to operate correctly. Fuel injection timing and injector operation are also within the manufacturer's specifications. Which condition is the most likely underlying cause?

A. Incorrect valve timing affecting cylinder filling and compression | B. Insufficient compression in one or more cylinders | C. Excessive fuel return through the injector leak-off circuit | D. Restricted fuel supply reducing injection quantity

Correct Answer: B. Insufficient compression in one or more cylinders

Rationale: Diesel engines depend on the heat generated by compressing air to ignite injected fuel. When cylinder compression is insufficient, the temperature reached during the compression stroke may not be high enough to produce reliable combustion, particularly when the engine is cold. Some injected fuel therefore remains partially or completely unburned and exits as white smoke. Uneven compression between cylinders can also cause rough running immediately after starting. A compression test or cylinder leakage test can help identify the affected cylinder. The condition may result from worn piston rings, damaged valves, incorrect valve timing or a defective cylinder-head gasket.


2. An automobile technician measures the voltage across a vehicle battery while the engine is running at approximately 1,500 rpm with the headlights and air conditioning switched on. The reading is 12.2 volts, although the battery itself is in good condition. Which investigation should receive the highest priority?

A. Measuring battery internal resistance using an appropriate battery tester | B. Testing the starter motor's current consumption during cranking | C. Testing the alternator charging output and voltage regulation | D. Inspecting the starter relay control circuit for excessive resistance

Correct Answer: C. Testing the alternator charging output and voltage regulation

Rationale: A conventional 12-volt vehicle charging system normally maintains a voltage above the battery's resting voltage when the engine is running. Depending on the manufacturer's specification, temperature and charging strategy, a conventional system commonly operates around 13.5–14.7 volts. A reading of 12.2 volts under electrical load suggests that the battery is supplying much of the electrical demand instead of receiving sufficient charging current from the alternator. The technician should investigate alternator output, the voltage regulator, drive-belt condition, wiring connections and voltage drops in the charging circuit. Modern smart-charging systems may intentionally vary voltage, so manufacturer specifications and operating conditions must also be considered.


3. A four-cylinder, four-stroke petrol engine has a firing order of 1–3–4–2. During an engine timing inspection, a technician confirms that cylinder number one has just completed its power stroke. Assuming the engine operates with evenly spaced firing intervals, which cylinder will deliver the next power stroke after a further 180 degrees of crankshaft rotation?

A. Cylinder number four | B. Cylinder number two | C. Cylinder number three | D. Cylinder number one

Correct Answer: C. Cylinder number three

Rationale: A four-stroke engine requires 720 degrees of crankshaft rotation to complete one full operating cycle. In a four-cylinder engine with evenly spaced firing intervals, a power stroke occurs every 180 degrees of crankshaft rotation. The firing order 1–3–4–2 means that cylinder number one is followed by cylinder number three, then cylinder number four and finally cylinder number two. Therefore, after cylinder number one completes its power stroke, cylinder number three is next in the firing sequence. Understanding firing order is essential when checking ignition timing, installing spark-plug leads, diagnosing misfiring and performing engine maintenance.


4. During an electrical diagnosis, a technician measures the voltage drop between the positive battery terminal and the starter motor's main positive terminal while the starter is cranking. The measured voltage drop is significantly higher than the manufacturer's permitted value. Which fault is most consistent with this result?

A. Excessive resistance in the starter motor's internal armature circuit | B. Excessive resistance in the starter motor's negative-side grounding circuit | C. A defective starter solenoid preventing proper engagement of the pinion | D. Excessive resistance in the positive battery cable or its connections

Correct Answer: D. Excessive resistance in the positive battery cable or its connections

Rationale: Voltage-drop testing identifies unwanted electrical resistance in a circuit while current is flowing. During cranking, the starter motor draws a substantial current, making even relatively small resistances in cables, terminals and connections capable of producing a significant voltage drop. A high reading between the battery positive terminal and the starter's main positive terminal indicates resistance in the positive-side supply path. Corroded terminals, loose connections, damaged cable strands or undersized cables are common causes. The technician should inspect and repair the affected connections before condemning the starter motor. Testing should be conducted under the appropriate cranking conditions and against the manufacturer's limits.


5. A heavy commercial vehicle develops a noticeable vibration through the steering wheel when travelling at approximately 90 km/h. The vibration becomes less noticeable at lower speeds, and no abnormal noise is detected from the wheel bearings. Which condition should be investigated first?

A. Excessive clearance in the steering gearbox | B. Incorrect wheel balancing or uneven tyre mass distribution | C. Excessive backlash in the rear differential | D. Incorrect engine valve clearance

Correct Answer: B. Incorrect wheel balancing or uneven tyre mass distribution

Rationale: Wheel imbalance produces centrifugal forces that increase with rotational speed. At certain road speeds, these forces can generate noticeable vibrations transmitted through the steering system and vehicle structure. Incorrect balancing, uneven tyre wear, damaged tyres or an improperly seated wheel can cause this problem. The technician should inspect tyre condition, wheel seating and balancing before replacing steering components. Steering gearbox clearance may cause looseness or wandering, while differential backlash generally produces drivetrain-related noises or impacts rather than a speed-dependent steering-wheel vibration. A road-speed vibration should also be distinguished from engine-speed-related vibration.


6. A vehicle's electronic control unit records a diagnostic trouble code indicating that the oxygen sensor signal remains excessively lean. Before replacing the oxygen sensor, which diagnostic action would provide the most useful initial information?

A. Inspecting the intake system for unmetered air leaks and checking fuel delivery | B. Replacing the engine control unit to eliminate possible software errors | C. Increasing the fuel pressure regulator setting without conducting tests | D. Cleaning the exhaust manifold and immediately resetting the fault code

Correct Answer: A. Inspecting the intake system for unmetered air leaks and checking fuel delivery

Rationale: A lean oxygen-sensor indication means that the exhaust contains more oxygen than expected under the relevant operating conditions. This may result from an actual lean air-fuel mixture caused by insufficient fuel delivery, restricted injectors, low fuel pressure or excessive unmetered air entering the engine. It can also result from an exhaust leak or a defective oxygen sensor or its wiring. Before replacing the sensor, the technician should examine fuel-trim data, inspect intake hoses and vacuum connections, assess fuel pressure and check for exhaust leaks. A diagnostic trouble code identifies a detected abnormal condition; it does not automatically prove that the component named in the code is defective.


7. A technician is inspecting a diesel engine fitted with a common-rail fuel injection system. The engine is switched off, but the technician intends to loosen a high-pressure fuel pipe to investigate a suspected leak. What is the correct safety procedure?

A. Loosen the pipe slowly while the engine remains warm to release pressure gradually | B. Disconnect the battery and immediately remove the high-pressure pipe | C. Operate the accelerator several times to reduce the pressure in the rail | D. Follow the manufacturer's pressure-relief procedure and verify that the system is depressurised before opening it

Correct Answer: D. Follow the manufacturer's pressure-relief procedure and verify that the system is depressurised before opening it

Rationale: Common-rail diesel injection systems operate at extremely high fuel pressures, which may remain present after the engine has been switched off. A high-pressure fuel jet can penetrate human skin and cause severe internal injuries, even when the external wound appears small. The technician must follow the manufacturer's prescribed shutdown and pressure-relief procedure and use the specified equipment to verify that pressure has been safely released before opening the system. Disconnecting the battery alone does not guarantee that residual rail pressure has disappeared. Suspected high-pressure injection injuries require immediate emergency medical treatment.


8. A 12-volt electrical circuit has a resistance of 4 ohms. If the circuit is supplied with a constant voltage of 12 volts, what current will flow through the circuit under normal operating conditions?

A. 0.33 amperes | B. 2 amperes | C. 3 amperes | D. 48 amperes

Correct Answer: C. 3 amperes

Rationale: Ohm's law establishes the relationship between voltage, current and resistance: (I = V/R). Substituting the given values, the current is (12/4 = 3) amperes. Therefore, the circuit draws 3 amperes under the stated conditions. This principle is essential when diagnosing vehicle electrical systems, calculating current consumption, selecting appropriate fuses and assessing circuit resistance. A technician must also remember that resistance may change with temperature and operating conditions, particularly in components such as electric motors and heating elements.


9. A vehicle fitted with an anti-lock braking system (ABS) develops an intermittent ABS warning light. Diagnostic testing reveals that one wheel-speed sensor occasionally produces an irregular signal, particularly when the vehicle travels over rough surfaces. Which condition is the most likely explanation?

A. Excessive brake fluid viscosity causing delayed hydraulic pressure release | B. An intermittent sensor wiring connection or damaged reluctor/encoder ring | C. Excessive clearance between the brake pedal and the master cylinder piston | D. Incorrect engine idle speed affecting the ABS hydraulic pump

Correct Answer: B. An intermittent sensor wiring connection or damaged reluctor/encoder ring

Rationale: ABS depends on reliable wheel-speed information from individual wheel sensors. These sensors detect the rotation of a toothed reluctor ring or magnetic encoder, depending on the system design, and transmit signals to the ABS control module. Damaged wiring, loose connectors, corrosion, excessive sensor air gaps, damaged reluctor teeth or defects in magnetic encoder rings can produce intermittent signals. Rough surfaces may cause the fault to become more noticeable because vibration affects an already weak connection or damaged component. The technician should inspect live wheel-speed data, sensor wiring, mounting condition and the relevant encoder before replacing the ABS control module.


10. A diesel-powered vehicle experiences gradual engine overheating during long-distance driving, particularly when climbing hills under heavy load. The coolant level is correct, the radiator is not externally obstructed and the cooling fan operates normally. Which additional condition could most directly explain inadequate cooling under these circumstances?

A. A thermostat that fails to open fully, restricting coolant circulation through the radiator | B. A water-pump impeller damaged sufficiently to reduce coolant circulation | C. A radiator pressure cap failing to maintain the specified system pressure | D. A partially restricted radiator core reducing coolant flow and heat transfer

Correct Answer: D. A partially restricted radiator core reducing coolant flow and heat transfer

Rationale: During prolonged high-load operation, an engine generates substantial heat and requires effective coolant circulation and heat dissipation. A partially blocked radiator core may restrict coolant flow through some passages and reduce the effective surface area available for heat exchange. This can cause overheating even when the coolant level is correct and the cooling fan is functioning. The technician should assess radiator temperature distribution, coolant circulation, thermostat operation, water-pump performance and possible internal restrictions. A radiator may appear externally clean while still suffering from internal deposits or blocked passages. Proper diagnosis is necessary before replacing cooling-system components.


11. A vehicle fitted with a manual transmission produces a grinding noise when the driver selects reverse gear, even after fully depressing the clutch pedal and waiting several seconds for the transmission input shaft to stop rotating. The noise disappears when the engine is switched off. Which fault is the most likely cause?

A. The clutch is not fully disengaging, allowing the transmission input shaft to continue rotating | B. The differential crown wheel has excessive backlash | C. The gearbox output shaft bearing has insufficient preload | D. The engine mounting brackets are excessively tightened

Correct Answer: A. The clutch is not fully disengaging, allowing the transmission input shaft to continue rotating.

Rationale: When the clutch is fully disengaged, engine torque should no longer be transmitted to the gearbox input shaft. If the clutch drags because of incorrect adjustment, hydraulic faults, a warped clutch disc, damaged pressure plate components or problems with the release mechanism, the input shaft may continue rotating. Reverse gears in many manual transmissions do not have synchronisers, making them particularly susceptible to grinding when the shaft is still rotating during engagement. The technician should inspect clutch release travel, hydraulic operation, pedal adjustment and clutch assembly condition. A clutch pedal that feels normal does not necessarily confirm complete clutch disengagement.


12. A 24-volt heavy vehicle electrical system uses two identical 12-volt batteries connected in series. Each battery has a rated capacity of 100 ampere-hours (Ah). What is the nominal voltage and capacity of the resulting battery arrangement?

A. 12 volts and 200 Ah | B. 24 volts and 200 Ah | C. 24 volts and 100 Ah | D. 48 volts and 100 Ah

Correct Answer: C. 24 volts and 100 Ah

Rationale: When two identical batteries are connected in series, their voltages add while their ampere-hour capacity remains the same. Therefore, two 12-volt, 100-Ah batteries connected in series provide a nominal output of 24 volts at 100 Ah. This arrangement is commonly used in heavy commercial vehicles requiring 24-volt electrical systems. In contrast, connecting the same batteries in parallel maintains 12 volts while increasing the total nominal capacity to 200 Ah. Correct battery connection is important because an incorrect arrangement can damage vehicle electrical equipment and charging components.


13. A diesel engine fitted with a turbocharger produces black exhaust smoke, loses power and develops excessive exhaust gas temperatures during acceleration. The air filter is clean, and the fuel injection system has no recorded fault codes. Which condition should be investigated as a possible cause?

A. Excessive engine coolant circulation through the radiator | B. A restricted or leaking turbocharger charge-air system reducing the air available for combustion | C. Excessively high battery electrolyte concentration | D. Incorrect adjustment of the parking brake mechanism

Correct Answer: B. A restricted or leaking turbocharger charge-air system reducing the air available for combustion

Rationale: A turbocharger increases the amount of air entering the engine, enabling efficient combustion of the injected fuel under higher load. If the charge-air cooler, intake ducting or associated connections are restricted or leaking, the engine may receive insufficient air for the quantity of fuel being injected. This can produce incomplete combustion, black smoke, reduced engine power and elevated exhaust temperatures. The technician should inspect boost pressure, intercooler condition, intake hoses, clamps, exhaust leaks and turbocharger operation. Fuel injection timing, injector condition and boost-control components should also be considered if the initial inspection does not identify the fault.


14. During preventive maintenance, a technician discovers that the outer shoulders of both front tyres are wearing more rapidly than the inner shoulders. Tyre pressures are within the manufacturer's specifications, and inspection reveals no suspension damage. Which wheel-alignment condition is most likely to cause this pattern?

A. Excessive negative camber on both front wheels | B. Excessive positive camber on both front wheels | C. Excessive rear-wheel toe adjustment | D. Incorrect differential gear ratio

Correct Answer: B. Excessive positive camber on both front wheels.

Rationale: Excessive positive camber causes the upper portion of the wheel to tilt outward relative to the vehicle. This changes the distribution of contact pressure across the tyre tread and can cause accelerated wear on the outer shoulder. Since tyre pressures are within specification and no suspension damage has been identified, excessive positive camber becomes a plausible alignment-related explanation. The technician should measure the camber angles and compare them with the manufacturer's specifications before making adjustments.


15. A technician uses a compression tester on a four-cylinder petrol engine. The recorded compression pressures are 175 psi, 172 psi, 174 psi and 115 psi respectively. Which diagnostic procedure would best help distinguish between worn piston rings and leaking valves in the cylinder with low compression?

A. Conducting a cylinder leakage (leak-down) test and identifying where escaping air is heard | B. Measuring the alternator charging current at maximum engine speed | C. Checking the fuel pump delivery pressure under acceleration | D. Measuring the exhaust manifold temperature at normal idle

Correct Answer: A. Conducting a cylinder leakage (leak-down) test and identifying where escaping air is heard

Rationale: The fourth cylinder has significantly lower compression than the other three cylinders, suggesting a localised sealing problem. A cylinder leak-down test introduces regulated compressed air into the cylinder when its piston is positioned at top dead centre on the compression stroke. Air escaping through the crankcase breather or oil filler opening may indicate worn or damaged piston rings or cylinder walls. Air heard through the intake manifold suggests an intake valve leak, while air escaping through the exhaust indicates an exhaust valve leak. Bubbles in the cooling system may suggest a head-gasket or cylinder-head problem. This test provides more specific information about the source of compression loss than a compression test alone.


16. A vehicle's charging system produces 14.2 volts at the battery terminals when the engine is running. However, the battery repeatedly becomes discharged overnight. A parasitic current test reveals a continuous current draw of 0.8 amperes after all electronic modules should have entered their sleep mode. Which action is the most appropriate next step?

A. Replace the alternator because the charging voltage is above 14 volts | B. Increase the battery charging voltage to compensate for overnight discharge | C. Isolate individual electrical circuits systematically to identify the source of excessive current draw | D. Replace the starter motor because it may be consuming current while stationary

Correct Answer: C. Isolate individual electrical circuits systematically to identify the source of excessive current draw

Rationale: A charging voltage of 14.2 volts suggests that the charging system is producing an output within the normal range of many conventional 12-volt systems, although manufacturer specifications must be considered. A parasitic current draw of 0.8 amperes is excessive for most passenger and utility vehicles after their electronic systems have entered sleep mode. This current consumption can discharge a battery over several hours. The technician should identify the affected circuit using appropriate current-measurement procedures, fuse voltage-drop testing or controlled circuit isolation. Possible causes include a faulty relay, aftermarket electrical equipment, a defective control module or a component that remains switched on. The battery and charging system should not be replaced without identifying the actual cause.


17. A heavy commercial vehicle fitted with an air-braking system takes an unusually long time to build up sufficient air pressure after starting. The compressor runs continuously, and inspection confirms that the air reservoirs and delivery connections have no significant leakage. Which condition should be investigated first?

A. Excessive brake pedal free play preventing the brake shoes from releasing | B. Worn compressor piston rings or defective compressor valves reducing air delivery | C. Excessive engine oil pressure affecting the brake chamber springs | D. Incorrect wheel alignment increasing the compressor's mechanical load

Correct Answer: B. Worn compressor piston rings or defective compressor valves reducing air delivery.

Rationale: The air compressor must deliver sufficient compressed air to the reservoirs to maintain the required operating pressure. Worn piston rings, defective compressor valves or other internal compressor defects can reduce air delivery, causing the system to take an unusually long time to build pressure. Since significant external leakage has been ruled out, the technician should investigate compressor performance, including its delivery rate and internal condition, in accordance with the manufacturer's testing procedure. The braking system must meet the required operating pressure before the vehicle is returned to service.


18. A technician is required to tighten cylinder-head bolts on an engine following replacement of the cylinder-head gasket. The manufacturer specifies a tightening sequence and a multi-stage torque procedure. Why is it important to follow the specified sequence rather than tightening each bolt individually to its final torque in an arbitrary order?

A. To maintain correct valve timing by keeping the camshaft and crankshaft in their specified positions | B. To prevent the cylinder head from moving laterally during engine operation | C. To ensure that each bolt produces identical clamping force regardless of tightening sequence | D. To distribute clamping force uniformly and minimise cylinder-head distortion and gasket damage

Correct Answer: D. To distribute clamping force uniformly and minimise cylinder-head distortion and gasket damage

Rationale: Cylinder-head bolts must apply an appropriate and reasonably uniform clamping force across the mating surfaces of the cylinder head, gasket and engine block. Tightening bolts in the wrong sequence or applying excessive torque to individual bolts can create uneven stresses, distort the cylinder head and compromise the gasket seal. Manufacturers therefore specify tightening sequences, torque stages and, in some engines, additional angular tightening procedures. Some cylinder-head bolts are torque-to-yield and must be replaced after removal according to manufacturer instructions. Correct tightening is essential for maintaining compression, preventing coolant and oil leakage and ensuring reliable engine operation.


19. A vehicle equipped with a hydraulic power-steering system develops a whining noise when the steering wheel is turned, and steering assistance becomes noticeably weaker at low engine speeds. The power-steering fluid level is correct. Which condition should be investigated first?

A. Air entering the hydraulic system or a restriction affecting pump inlet flow | B. Excessive clearance between the gearbox output shaft and differential crown wheel | C. Incorrect engine ignition timing causing delayed combustion | D. Excessive brake master-cylinder piston travel

Correct Answer: A. Air entering the hydraulic system or a restriction affecting pump inlet flow

Rationale: A hydraulic power-steering pump must receive an uninterrupted supply of fluid to generate the pressure required for steering assistance. Air entering the system can cause aeration, cavitation-like noise, inconsistent hydraulic pressure and reduced assistance. A restricted suction hose, blocked filter where fitted, loose inlet connection or defective pump can produce similar symptoms. The technician should inspect the fluid condition, suction hose, clamps, pump operation and system for air entry or restrictions. The correct bleeding procedure should be followed after repairing any identified leak or restriction. Operating a hydraulic steering pump with insufficient fluid supply can cause additional pump damage.


20. A petrol engine has a compression ratio of 10:1. If the cylinder's clearance volume is 50 cubic centimetres, what is the approximate swept volume of that cylinder?

A. 50 cm³ | B. 450 cm³ | C. 500 cm³ | D. 550 cm³

Correct Answer: B. 450 cm³

Rationale: Compression ratio is calculated by dividing the total cylinder volume at bottom dead centre by the clearance volume at top dead centre. The formula is (CR = (V_s + V_c)/V_c), where (V_s) is swept volume and (V_c) is clearance volume. Substituting the given values gives (10 = (V_s + 50)/50). Multiplying both sides by 50 gives a total cylinder volume of 500 cm³. Therefore, swept volume equals (500 - 50 = 450) cm³. Understanding this relationship is important when assessing engine displacement, compression characteristics and combustion-chamber design.


21. A technician is investigating a vehicle that pulls to one side during braking. The tyre pressures are equal, the front suspension components appear serviceable and no significant wheel-alignment abnormalities are found. Which fault is a particularly likely explanation?

A. Unequal tyre rolling resistance caused by differences in tyre construction | B. Excessive caster-angle difference between the left and right front wheels | C. Unequal braking force between the left and right wheels, possibly due to a sticking caliper or hydraulic fault | D. Excessive steering linkage clearance allowing the front wheels to change direction under braking

Correct Answer: C. Unequal braking force between the left and right wheels, possibly due to a sticking caliper or hydraulic fault

Rationale: When braking force differs significantly between the left and right wheels on the same axle, the vehicle may pull towards the side generating greater braking force. A sticking brake caliper, seized slide pins, contaminated friction material, restricted brake hose or uneven hydraulic pressure can cause this condition. The technician should compare wheel temperatures where appropriate, inspect caliper movement, examine pads and discs, check hydraulic operation and assess brake-force distribution using suitable testing equipment. A vehicle that pulls during braking presents a safety risk and should not be returned to service until the fault has been corrected and braking performance verified.


22. An automobile technician measures the resistance of a suspected faulty coolant-temperature sensor after disconnecting it from the vehicle wiring. The sensor is an NTC thermistor. What should happen to its resistance as the coolant temperature increases?

A. Its resistance should increase proportionally with coolant temperature | B. Its resistance should remain constant regardless of temperature | C. Its resistance should fall to zero when the engine reaches operating temperature | D. Its resistance should decrease as coolant temperature increases

Correct Answer: D. Its resistance should decrease as coolant temperature increases

Rationale: An NTC (Negative Temperature Coefficient) thermistor is an electronic temperature-sensitive resistor whose resistance decreases as its temperature rises. In vehicle engine-management systems, the coolant-temperature sensor provides information that the electronic control unit uses to adjust fuel delivery, ignition timing, cooling-fan operation and other functions. When the engine is cold, the sensor generally has a higher resistance than when the engine is hot. The technician can test the sensor using a multimeter and compare measured resistance at specified temperatures against the manufacturer's resistance-temperature chart. A faulty sensor may cause incorrect fuel mixture calculations, poor starting, abnormal fan operation or inaccurate temperature readings.


23. A rear-wheel-drive vehicle produces a clunking noise when the driver alternates between accelerating and releasing the accelerator. Inspection reveals excessive rotational free movement between the transmission output shaft and the differential input under the same test conditions. Which component should be investigated as a likely source of excessive drivetrain backlash?

A. The engine thermostat and water-pump assembly | B. Universal joints, differential gear clearances and associated driveline connections | C. The front-wheel brake pad retaining clips | D. The alternator voltage regulator and drive belt

Correct Answer: B. Universal joints, differential gear clearances and associated driveline connections

Rationale: In a rear-wheel-drive vehicle, engine torque is transmitted through the gearbox, propeller shaft and differential to the drive wheels. When the driver alternates between acceleration and deceleration, torque direction changes and excessive free movement in the driveline may produce a noticeable clunk. Possible causes include worn universal joints, loose propeller-shaft connections, excessive differential gear backlash or worn splines. The technician should inspect each connection systematically and compare measured movement with manufacturer specifications. It is important to distinguish normal cumulative driveline clearance from excessive backlash caused by worn or damaged components. Replacing the differential without inspecting the entire driveline may result in unnecessary repair costs.


24. A vehicle's engine oil pressure warning light illuminates when the engine reaches normal operating temperature and idles at a low speed. The warning disappears when engine speed is increased. Further inspection confirms that the oil pump is operating within specification, but crankshaft bearing clearances exceed the manufacturer's permitted limits. Which condition explains the low oil pressure?

A. Excessive clearance in engine bearings allowing increased oil leakage and reduced oil pressure at low speed | B. A worn oil pump unable to maintain the required delivery pressure at low engine speed | C. A pressure-relief valve remaining partially open and allowing excessive oil to bypass the lubrication circuit | D. A restricted oil pickup strainer limiting the supply of oil to the pump

Correct Answer: A. Excessive clearance in engine bearings allowing increased oil leakage and reduced oil pressure at low speed

Rationale: Engine oil pressure depends on the oil pump's ability to supply sufficient oil flow against the resistance of the lubrication system. As engine bearings wear, excessive clearance allows more oil to escape through bearing surfaces, potentially reducing overall oil pressure. When the engine is hot, the oil becomes less viscous, making the pressure reduction more noticeable, particularly at idle when pump speed is low. Increasing engine speed raises pump delivery, which may temporarily increase oil pressure and extinguish the warning light. The technician should verify the warning using a suitable mechanical oil-pressure gauge, inspect the oil level and viscosity, and investigate pump condition, oil passages and bearing clearances. The warning must never be ignored because inadequate lubrication can cause severe engine damage.


25. A heavy commercial vehicle has a final-drive reduction ratio of 4.5:1. If the propeller shaft rotates at 1,800 revolutions per minute (rpm), what is the approximate rotational speed of the differential crown wheel, assuming no slippage?

A. 8,100 rpm | B. 450 rpm | C. 400 rpm | D. 810 rpm

Correct Answer: C. 400 rpm

Rationale: The final-drive ratio expresses the relationship between the rotational speed of the pinion and the crown wheel. A ratio of 4.5:1 means that the pinion must rotate 4.5 times for the crown wheel to complete one revolution. Therefore, the crown-wheel speed is calculated by dividing the propeller-shaft speed by the final-drive ratio: 1,800 ÷ 4.5 = 400 rpm. The differential crown wheel consequently rotates at approximately 400 rpm. This reduction in rotational speed increases the torque transmitted to the drive wheels, assuming an ideal gear system. Final-drive ratios are important when understanding vehicle pulling power, engine speed, road speed and drivetrain performance.


26. A diesel engine develops excessive fuel consumption, reduced power and irregular combustion after its timing belt has been replaced. Inspection reveals that the crankshaft timing marks are correctly aligned, but the camshaft timing marks are slightly displaced. What is the most likely consequence of this condition?

A. Incorrect valve opening and closing events affecting cylinder filling and combustion | B. Increased alternator output caused by higher mechanical resistance | C. Excessive fuel pressure resulting from incorrect injector nozzle calibration | D. Reduced transmission lubrication caused by incorrect crankshaft rotation

Correct Answer: A. Incorrect valve opening and closing events affecting cylinder filling and combustion

Rationale: The camshaft controls the opening and closing of the engine's intake and exhaust valves, while the crankshaft controls piston movement. Their relative positions must be correctly synchronised to ensure that the valves operate at the appropriate stages of the four-stroke cycle. If the timing belt is installed with incorrect camshaft alignment, valve timing becomes inaccurate, affecting cylinder filling, exhaust gas removal and combustion efficiency. Depending on the degree of displacement and engine design, the condition may also cause poor starting, rough running, loss of power or valve-to-piston contact. The technician must follow the manufacturer's timing procedure and verify the alignment of all timing components before starting the engine.


27. A common-rail diesel engine produces excessive white smoke and rough running, particularly at idle. An injector return-flow test reveals that one injector returns significantly more fuel to the return line than the other injectors under identical testing conditions. What does this finding most strongly indicate?

A. The injector nozzle is completely blocked and cannot deliver fuel | B. The fuel filter is supplying excessive pressure to all injectors | C. Excessive internal leakage within the injector is reducing its ability to maintain the required injection pressure | D. The engine's exhaust manifold is restricting the movement of exhaust gases

Correct Answer: C. Excessive internal leakage within the injector is reducing its ability to maintain the required injection pressure

Rationale: In a common-rail diesel system, fuel returning from an injector provides an indication of internal leakage through its control and sealing components. If one injector returns substantially more fuel than the others under identical conditions, it may have excessive internal leakage caused by worn or damaged internal components. This can interfere with the injector's ability to maintain the required pressure and deliver the correct quantity of fuel at the appropriate time. The resulting poor combustion may produce rough idle, difficult starting, power loss and abnormal exhaust emissions. The technician should compare the test results with the manufacturer's specified return-flow limits before deciding whether the injector requires repair or replacement.


28. A vehicle's electronic control modules communicate through a high-speed Controller Area Network (CAN) bus. During diagnosis, the technician switches off the ignition and measures resistance across the CAN-H and CAN-L terminals using an appropriate multimeter. The reading is approximately 120 ohms instead of the expected 60 ohms. What is the most likely explanation?

A. One of the two 120-ohm CAN bus termination resistors is disconnected or defective | B. The CAN-H and CAN-L wires are short-circuited together | C. The CAN-H wire is short-circuited to the vehicle's ground | D. The engine control unit has developed excessive internal resistance in its fuel injector drivers

Correct Answer: A. One of the two 120-ohm CAN bus termination resistors is disconnected or defective.

Rationale: High-speed CAN networks commonly use two 120-ohm termination resistors connected in parallel, producing approximately 60 ohms when measured across CAN-H and CAN-L with the network powered down. A reading of approximately 120 ohms suggests that only one termination resistor is being detected, possibly because the other resistor or its connection is open. The technician should verify the network configuration and inspect the termination points before replacing any control module.


29. During an engine diagnostic test, a technician observes the crankshaft position sensor waveform using an automotive oscilloscope. The waveform contains an unexpected interruption at a point where no reference gap should exist. The sensor wiring, connector and mounting air gap have been inspected and found to be within specification. Which condition should be investigated next?

A. Excessive engine oil pressure during acceleration | B. A damaged or contaminated crankshaft reluctor wheel affecting the sensor signal | C. Incorrect adjustment of the vehicle's rear drum brakes | D. Excessive refrigerant pressure in the air-conditioning system

Correct Answer: B. A damaged or contaminated crankshaft reluctor wheel affecting the sensor signal.

Rationale: The crankshaft position sensor detects the movement of a reluctor or trigger wheel to provide crankshaft position and rotational speed information. Damaged or missing teeth, metallic contamination or physical interference can produce abnormal interruptions in the waveform. Since the sensor wiring, connector and mounting air gap have already been checked, the technician should investigate the reluctor wheel and compare the waveform with the manufacturer's reference pattern.


30. A diesel-powered commercial vehicle is fitted with an Exhaust Gas Recirculation (EGR) system. The EGR valve becomes stuck in the open position while the engine is operating at idle. Which effect is most likely to occur?

A. Excessive exhaust gas entering the intake may reduce available oxygen and cause unstable combustion | B. Increased oxygen concentration in the intake will automatically increase engine power | C. Engine oil pressure will increase because exhaust gases lubricate the intake valves | D. Fuel injection pressure will rise because the EGR valve controls the common-rail pump

Correct Answer: A. Excessive exhaust gas entering the intake may reduce available oxygen and cause unstable combustion

Rationale: The EGR system recirculates a controlled quantity of exhaust gas into the intake system to reduce combustion temperatures and consequently reduce nitrogen oxide emissions. The EGR valve is normally controlled according to engine operating conditions. If it remains open when the engine is idling, excessive exhaust gas may enter the intake manifold and displace fresh air. This reduces the oxygen available for combustion and may cause rough idling, hesitation, stalling and increased smoke. The technician should assess commanded and actual EGR operation, inspect the valve and associated passages, and check relevant sensors and control circuits. An EGR valve should not automatically be replaced without confirming the cause of the malfunction.

📘 Get the Full Aptitude Test Questions PDF through your  Gmail (Questions 1–150)

You’ve just accessed the first 30 questions. The full set of 150 expertly prepared aptitude test questions for Artisan Grade II (Automobile) – TANESCO,  Is available, pay, and get access.

To get access to the full PDF, please make a payment of Tsh 10,000 to the LIPA numbers below:

CRDB Lipa TANQR : 11692089
Airtel Money LIPA Number: 13970429
Yas/Tigo LIPA Number: 18401500
M-Pesa WAKALA:  826910
Registered Name: Johnson Yesaya Mgelwa

After payment, please send a text message to notify us of your payment:

Contact Number: +255 628 729 934

⚠️ Important Notice

  • The PDF will be watermarked with your name and phone number and protected for personal use only.
  • Redistribution, sharing, screenshotting, or copying the contents is strictly prohibited. When you share unlawfully, your name and phone number are visible and easy to trace as you leaked a document to other third parties.
  • Legal action may be taken against the misuse of this material.

Thank you for supporting quality content. Best of luck in your interview preparation!

Post a Comment

0 Comments